Elementa Hybrid Genset pairs gas and BESS for AI data centers

Illustrative rendering of white enclosures with rooftop frames beside a long building and two stacks.
Illustrative rendering of a gas-and-battery power yard beside a data center at dusk.Image Credit: AI
Published on: 

Executive summary

At RE+ 2026 in Las Vegas, Trina Storage has unveiled the Elementa Hybrid Genset, in which gas engines and battery storage are combined in one plant. It has been aimed at AI data centers that cannot yet draw enough power from the grid, and its controller can serve sites of 5 MW up to 1 GW.

Trina Storage, a China-based BESS integrator, took a gas-and-storage power plant to RE+ 2026 in Las Vegas on 18 November. Named the Elementa Hybrid Genset, it is meant for AI data centers whose grid connection has been delayed or limited, or is not available at all. It had been previewed at Data Center World Power in September.

Three parts make up the plant, and only two of them are Trina Storage's. The gas engines are reciprocating units of up to 2.5 MW, which are supplied by qualified partners. Trina Storage provides the Elementa DC battery systems and the Electra AC platform, with grid-forming capability, in reference blocks of 5 MW/10 MW. It also supplies the hybrid plant controller, which has been designed for applications from 5 MW to 1 GW, and it integrates the whole system.

It is the AI workload that makes both of them necessary. Power demand from such workloads can rise or fall sharply, and gas generators alone may struggle to follow it, according to Trina Storage. Batteries, for their part, respond quickly, although they are not designed for extended outages. Under the control scheme, therefore, the battery responds to a sudden load increase immediately, and the gas generators are ramped up gradually. Should a fault occur, the system isolates the affected equipment, and the battery and the gas generators that remain available support the critical loads.

AI data centers have demanding power requirements, particularly when grid capacity is constrained, or workloads fluctuate rapidly. Elementa Hybrid Genset brings gas generation, battery storage and hybrid controls together in one system architecture, designed to coordinate these resources according to project needs.

Eric Cao, Vice President of Trina North American PV and BESS Business

The plant has also been designed to suit differing grid conditions. It supports four reference scenarios, namely grid-connected sites with backup generation, grid-constrained sites, bridge-to-grid projects and off-grid sites, and solar PV can be added where it is appropriate. Of its two architectures, Load Sensing gives priority to cost efficiency and system performance, whereas Double Conversion provides full electrical isolation and a higher power quality. The choice depends on the IT load profile and the grid conditions.

The Elementa Hybrid Genset has not yet reached its final form. Trina Storage is still testing it in simulation, with hardware in the loop, and on a platform that has real generation, conversion and storage equipment. Tests of the grid-forming function and of the hybrid controls are continuing, as is certification. Final configurations and performance specifications are to be set for each project, and the company is working with data center developers and partners on project-specific designs.